We are proud to announce that JDMyard is now appointed official distributor for HARDRACE products. We will be stocking all type of bushing/alignment products for all popular makes and models in the coming next few weeks. (Honda, Mitsubishi, Nissan, Subaru, Toyota)

All standard Hardrace bushes are made out of Reinforced Rubber with Anti-crank technology. With harness of 150% more than OEM items, you can be sure to be rewarded with solid steering response and improve suspension feel.

Some parts in stock now ready for pick up

-EG Civic Complete Bushing kit $445
-EK Civic Complete Bushing kit $445
-DC2 Integra Complete Bushing kit $445

-EG/DC2 Front Camber kit $295/pair
-EK Front Camber Kit $295/pair
-EG/EK/DC2/EF rear camber kit $135/pair

-EG/EK/DC2/DC2/EP3 Front Roll Center Adjuster $195/pair
-EG/EK/DC2 Rear trailing arm bushing $115/pair

ETC ETC

Feel free to contact us for more information on Hardrace products!

Due to the popular demands and countless request from our customers, we are now providing Custom Parts and Services to the community.

Here are a few examples of the products and services that are now available at JDMYard.

JDMYard B20VTEC conversion kit - $295

JDMYard Max Bore Throttle Body
Custom Fully Bored Throttle body with a new butterfly to suit.
Prices start from $195 for a Single Throttle Body set up. (OEM/aftermarket/ITB)

JDMYard Redrilling Rotors $70/Pair
4x (100~114.3) Setup
*turn around time: 2-3 working days

JDMyard Flywheel machining $65
*turn around time: 2 working days

JDMYard K20A Baffled Oil Sump- $380
Bang for buck oil sump setup for the circuit and prevent oil starvation

(exchange with your stock K20A Oil Sump)

JDMYard KSwap Header $1450
*Stainless 304 / Available in Mild steel - Ceramic coated
*Equal tuned length 4-2-1 header
*To suit EG/EK(without ABS)/DC2 ~ K20/K24 swap
*2.5inch collector (3inch collector can be ordered aswell)
*Full TIG Welding
*Handmade collectors
*Used on JDMYard’s EGK24A (11.82@113.6mph) on stock internal K24A3~154kw@wheel.

Stainless 304

Mild steel ~ Ceramic coated

JDMYard KSwap Intake Manifold *PM for pricing
*Our Intake Manifold allows a 75~90mm throttle body set up. We recommend a Wilson Manifold or Edelbrock TB*
Dyno Proven and Proven countless times down the 1/4mile.
Used on JDMYard’s EGK24A and BADHBT’s DC2, YBOOST’s DC2
Suits any KSwap EG/EK(EKK2)/DC2 (using a half sized radiator)
1 x JDMYard intake manifold
1 x 75~90mm throttle body
1 x TPS sensor

80mm Throttle body

JDMYard Intake manifold

Combined with Custom Velocity Stack (for Drag use only) ~ seen JDMYard’s 11sec EGK24A !

EG/DC2/EF Beaks Purple Rear Tie bar $245 $225

EK Beaks Purple Rear Tie Bar $245 $225

DC5/EP3 Beaks Purple Rear Tie Bar $245 $225

Blox Purple Forged Lug nuts (16pcs) $160 $140

Blox Purple Rear Lower Control Arms
EG/DC2 (Non Type R) $265 $225
EK $265 $225

Benen Purple Front Tow hook $125 $115

Benen Purple Rear Tow hook $125 $115

Benen Purple Radiator stay 92-95 EG $45 $35

“Ferodo’s DS2500 racing brake pads represent a new generation of friction material that’s low in compressibility, ensuring a firm pedal while providing great disc and pad life.

Combined with low wheel dusting and good noise characteristics, this product is the brake pad for the driver who needs the highest track-day braking performance.”

Front
DC5R $290 $219
S2000 $290 $219
EP3R $290 $219
DC2R $300 $249
NSX $300 $249
EK4 VTIR $320 $269

Rear
DC5R $260 $199
EP3R $260 $199
DC2R $260 $199

Whole bunch of Genuine Nardi Deep Corn’s finally arrived! 100% made in Italy with premium Italian leather (smells awfully good too!!)

Height comparison between 350mm (80mm dish) and 330mm (50mm dish)

Sport Rallye Deep Corn 350mm Perforated leather with red stitching $425 gst incl

Sport Rallye Deep Corn 350mm Suede with red stitching $425 gst incl

Sport Rallye Deep Corn 330mm Perforated leather with red stitching $425 gst incl

Sport Rallye Deep Corn 330mm Suede with red stitching $425 gst incl

Yes, it is that time of year again, when your sitting in your Recaro, burning your foot on the floorpan, without any aircon because it makes your car go quicker around the track. You’re sweating like a mad cow because Summer is here ! Going back a few months, we at JDMYard were kind enough to set you guys up with a cooling equipment combo and it is here again ! Fair enough you have to suffer from the summer heat, but do your car a favour and don’t let it suffer either.

During the Summer08/09, we sold out on KOYO radiators real quick as most cars were failing to perform in the heat with leaking and busted radiators. Get yourself into JDMYard ASAP and prevent yourself from burning out this summer !

Koyo Half/Full Size Radiator - Available for most makes from Honda, Mitsubishi, Nissan, Toyota, Mazda, & Subaru

Mugen Thermostat

Mugen Fanswitch

Mugen Radiator Cap

Contact Us for prices and any queries on our Summer Preparation Package !

Being Type One Racing’s Australian Distributor, we currently have a SALE on the full T1R Lineup of parts !
Be quick because these reduced prices wont last long !

The SALE includes:
All Suspension Components: Coilovers, Springs, Strut bars and Braces, & Camber kits

All Exhaust Components: B Pipes, Headers & Mufflers

All Accessories: Lugnuts, Gearknobs, Shift Boots, Tie Rod Ends and Spacers

See in store for more detail.

Combined with your OEM EK9 Wing, set your car apart from the rest with some of Mr. Alex’s Wing lifters !
Add that extra bit of downforce/aerodynamics when you’re chasing those laptimes around the track, or use it to enhance or give the rear end of your car abit more character !

Straight from Japan, Here are Alex Wing Lifters for EK9 wings with 3 levels of adjustment !
lifters

Zico’s EK

See in store for more details.

The Eibach Pro-Kit is the perfect answer for most frequently-driven street cars. It´s our legendary spring system that dramatically improves both a vehicle´s performance and appearance.

Pro-Kit lowers your car´s center of gravity, reducing squat during acceleration, body roll in corners and excessive nose-dive under braking. When combined with Plus-1 or Plus-2 wheels and tires, the Eibach Pro-Kit is the finishing touch to a winning recipe for performance. Pro-Kit also reduces excessive fender-well clearance, making your car look just as hot as it performs.

Every Eibach Pro-Kit is designed and tested by our suspension engineers and performance driving professionals, to deliver aggressive good looks and high performance handling, without ever compromising safety or ride quality. By using our proprietary, progressive spring design, Pro-Kit provides the ultimate balance to take your passion for driving to a whole new level.
Click for Source

Application

Accord Euro CL9 $516
Front: 1.6″drop
Rear: 1.4″ drop

Accord Euro CU2 $516
Front: 1.6″drop
Rear: 1.4″ drop

Civic EG/EK 92-00 $478
Front:1.3″drop
Rear: 1.3″drop

Civic FD1 FD2 $478
Front: 1.0″drop
Rear: 1.2″drop

Integra DC2 94-01 $478
NB: DC2R’s will receive half the drop due to factory lowering
Front:1.3″drop
Rear: 1.3″drop

Integra DC5 02-04 Type R $510
Front:1.0″drop
Rear:1.4″drop

Integra DC5 05-06 Type S $510
Front: 1.0″drop
Rear: 1.4″drop

Jazz GD1/3 GE8 $478
Front: 1.6″drop
Rear: 1.3″ drop

S2000 99-05 $552
Front: 1.0″drop
Rear: 1.0″drop

Feel free to Contact Us at JDMYard for any enquiries !