

*A $6 monthly account fee applies
(only payable if a balance is owing) See full Ts & Cs
Seasoned mechanics and gear heads know that more often than not, OEM replacement parts are more reliable than aftermarket parts. Unfortunately, anyone who has searched for an OEM replacement for a ACURA RSX-S or Civic Si throttle position sensor (TPS) knows that Acura/Honda only sells them as part of the throttle body with a steep list price of over $800 USD. Aftermarket alternatives have existed for years, but all that was available until now were poorly made copies and expensive adapted versions of other sensors. That's why ACUITY designed a replacement TPS from scratch. Instead of using the OEM wiper-style design, we used modern hall effect technology to provide improved reliability and accuracy. Combine this with a tastefully designed, nylon composite injection molded housing and you have an incredibly durable design. Tested to over 2 million cycles, every design element in the ACUITY TPS was chosen to provide an improvement over the OEM design. It's no coincidence that the ACUITY TPS looks a bit different than its OEM counterpart, that's because it is. The hall effect technology used provides a contactless design that reduces wear and tear while offering a smaller form factor and reduced weight.
The Benefits of Hall Effect:
Before the introduction of drive-by-wire throttle bodies, Honda used wiper-style variable resistors to measure throttle position. These OEM sensors and the many re-branded, low-quality sensors that look like them are prone to premature wear and unsteady measurements due to engine vibrations. Designed by engineers with a background in Formula 1 and LMP racing, the ACUITY hall effect sensor uses a contactless design that is highly resistant to vibrations, meaning it will give you reliable readings for many years. In addition, since the ACUITY Hall-Effect TPS is equipped with an on-board signal processor, the voltage output is incredibly smooth and consistent. The end result is improved engine responsiveness at tip-in, improved idle, and improved throttle response, especially on vehicles with stiffer than stock engine mounts.
(ACUITYTPS)
SKU | ACUITYTPS |
Brand | ACUITY INSTRUMENTS |
Shipping Weight | 5.0000kg |
Shipping Width | 0.050m |
Shipping Height | 0.050m |
Shipping Length | 0.050m |
Help other JDMyard Pty Ltd users shop smarter by writing reviews for products you have purchased.
Welcome to our website. If you continue to browse and use this website, you are agreeing to comply with and be bound by the following terms and conditions of use, which together with our privacy policy govern JDMyard Pty Ltd’s relationship with you in relation to this website. If you disagree with any part of these terms and conditions, please do not use our website.
The term ‘JDMyard Pty Ltd’ or ‘us’ or ‘we’ refers to the owner of the website whose registered office is Unit 25, 317-321 Woodpark Road, SMITHFIELD, NSW, 2164, AU. Our ABN is 53131333312. The term ‘you’ refers to the user or viewer of our website.
The use of this website is subject to the following terms of use:
At Jdmyard Pty Ltd we do things a little differently. For starters, we take a great deal of care when we handle your personal information and we do so in line with the 13 Australian Privacy Principles (APPs) that can be found at the OAIC website (www.oaic.gov.au).
Jdmyard Pty Ltd has developed a simplified and extended policy to help you better understand how your data is stored and used by us, as well as the purpose for which it is used and why. This simplified version will give you a quick snapshot, or if you're up for a thorough read, please view our complete Privacy Policy here.
This simplified Privacy Policy applies to personal information collected by Jdmyard Pty Ltd (jdmyard.neto.com.au).
Both the simplified privacy policy and the extended privacy policy were last updated on 18/08/2015.
At Jdmyard Pty Ltd we accept payments via the following third parties:
Paypal
Afterpay
Braintree
Zip Money
All payment information that is entered on our website is sent to these third parties securely and with industry standard encryption. No payment information is retained on our systems and is all managed by these third parties. Please see their websites above for more information on how they handle your personal and payment information.
Personal information is information that may identify you or by which your identity may be reasonably determined. Such personal information may include your name, address, other contact details, your date of birth, or any other information that may be provided by you in order to access or make use of our services at www.jdmyard.com.au. In this privacy policy, 'personal information' has the same meaning as defined by section 6 of the Privacy Act 1988 ('Privacy Act').
The main way we collect personal information is through you directly or through your authorised representative. That is, when you visit us at www.jdmyard.com.au and submit your personal information or request your personal information to be used (i.e. by subscribing to an email newsletter).
We sometimes collect personal information from a third party or from a publicly available source, but only if:
Your personal information may be collected through the following services that are used on our website:
We only collect personal information for purposes which are directly related to our functions or activities under the Privacy Act, the Freedom of Information Act 1982 (FOI Act), and only when it is necessary for or directly related to such purposes.
We only use personal information for the purposes for which we collected it – purposes which are directly related to one of our functions or activities that on the whole create a better user experience for you at www.jdmyard.com.au.
We do not give personal information about an individual to any government agencies, private sector organisations or anyone else unless one of the following applies:
We take steps to protect the personal information we hold against loss, unauthorised access, use, modification or disclosure, and against other misuse.
When the personal information that we collect is no longer required, we destroy or delete it in a secure manner.
Yes, you can access the personal information that we hold about you, and you can ask us to correct the personal information we hold about you. For more information, see our extended Privacy Policy or alternatively you can contact us directly using the contact details below.
Jdmyard Pty Ltd is bound by the Australian Privacy Principles in the Privacy Act. We care about our users and do everything we can to adhere to the 13 Australian Privacy Principles as per the OAIC guidelines.
For further information contact us at support@jdmyard.com.au or alternatively you can write to us at jdmyard Pty Ltd, 25/317-321 Woodpark Rd Smithfield NSW 2164.
Simple instalment plans available instantly at checkout
Use your existing debit or credit card
No long forms, instant approval online
Pay fortnightly, enjoy your purchase straight away!
All you need is:
1) A payment card; 2) To be over 18 years of age; 3) Resident of country offering Afterpay
To see Afterpay's complete terms, visit https://www.afterpay.com/terms
© 2021 Afterpay