02-05 DC5 INTEGRA

• Ref No 5

• Ref No: 9 Oil Seal (35X58X8) (Nok)
• Bell Housing Outside

• 1 x Honda Clutch Master Cylinder
• 1 x Honda Clutch Slave Cylinder
• 1 x 0.5L Motul Dot 3/4 Brake Fluid
• 1 x JDMyard SS Clutch Line

• Ref no 3
• Compatible with 02-04 DC5 gear driven VSS only

• Ref No, 2

• Upgraded version

• Ref No, 1

• DC5 TYPE S Clutch Slave Cylinder Ref: #44

• Ref No: 8 Bearing, Needle 
• 35X68X20

• Wheel Bearing 84 out 45 in
• Fits '98 JDM DC2 Type R 

• Ref. No, 4

• Ref No, 1

• Countershaft Set Ref No. 1

• Boot, Release Fork Ref No. 5

• Ref No: 10 Cylinder Assy, Clutch Slave

• Collar, Dtance (40X47X27.5) Ref No. 8

• Collar, Dtance (28X35X24) Ref No. 11

• Bolt, Special (11MM) Ref No. 6

• Bolt, Special (11MM) Ref No. 5

• Ref No: 7 Bolt (12mm)

• Ref No: 10 Oil Seal (28X43X7) (Nok)
• Inside Bell Housing

• Bearing, Ball (28X72X18) Ref No. 15

• Bearing, Needle (47X52X23) Ref No. 16

• Bearing, Needle (39X44X24) Ref No. 16

• Bearing, Needle (35X40X24) Ref No. 17

• Plate, Oil Gutter Ref No. 3

• Plate C, Oil Guide is Ref No. 3

• Collar, Distance (40X47X28) is Ref No. 11

• Damper, FRiction (Second) is Ref No. 17

• Spring, Ball Setting is Ref No. 8

• Screw, Ball Spring Setting is Ref No. 14

• Ball, Steel (#10) (5/16) is Ref No. 40

• Plate M, Oil Guide is Ref No. 2

• Magnet, Transmission is Ref No. 4

• Washer, Spring (28MM) is Ref No. 16

• Washer (28MM) is Ref No. 17

• Spring, Release Fork Setting is Ref No. 8

• Ref No. 4

• Ref No, 11
• 32mm

• Ref No: 27 Seal, Half Shaft (Outer) (Nok)

• K20 Gearbox Differential Bearing

• K20 Clutch Pressure Plate Bolt

• Holder, Reverse Shift is Ref No. 4

• Piece, Reverse Shift is Ref No. 5

• Ref No: 9 Sleeve Set (1-2)

• K20 1st & 2nd Gearbox Fork Ref: #2

• K20 3rd & 4th Synchro Set

• K20 5th & 6th Synchro Set

• K20 5th & 6th Gearbox Fork Ref: #1

• K20 Throwout Bearing Ref No: 1

K20 Gearbox 1st Counter Gear Ref #2

• K20 Gearbox 2nd Counter Gear Ref #3

• K20 Gearbox 3rd Counter Gear Ref No: 6

• K20 Gearbox 4th Counter Gear Ref #6

• K20 Gearbox 4th Main Gear Ref # 4

• Ref No: 4

• K20 Gearbox 5th Main Gear Ref # 6

• K20 Gearbox 6th Counter Gear Ref #6

• K20 Gearbox 6th Main Gear Ref # 7

• Ref No: 11 Bolt, Special (20X25)

• Ref No: 17 Dust Seal (18X24X5)

• Ref No: 13 Bearing, Ball (30X72X17)

• Fork, Clutch Release Ref No. 2

• Bolt, Release Fork Ref No. 7

• Ref No: 21 Bolt, Hex. (10X1.25)

• Ref No: 21 Plate, Change Wire

• Ref No: 29 Washer A, Shift Wire (1.6mm)

• Ref No: 31 Washer A (1.6mm)

• Ref No: 30 Washer B, Shift Wire (0.5mm)

• Ref No: 32 Washer B, Select Wire (0.5mm)

• Ref No: 7 Bearing, Ball (28X64X15)

• Ref no #3
• Ring gear only