SPOON SPORTS OIL FILTER B/F/K/L SERIES
The appeal of Honda cars is their engines that rev comfortably and at high rpm.
Daily oil management is important to bring out 100% of the engine's performance. It is basic to change the oil every 3,000 to 5,000km, but if you also change the oil filter at the same time, you can maintain even better condition.
We have developed an oil filter that can achieve both high filtration performance and low pressure loss, which are contradictory properties, so that you can enjoy your Honda engine for a long time.
A strong magnet is placed inside the filter to absorb fine iron particles in the oil, reducing the load on the filter paper and using filter paper with low pressure loss. As a result, we have achieved filtration performance that removes 98% of particles of 50 microns, achieving both high filtration performance and low pressure loss.
Furthermore, improved filtration performance has ensured the filtration performance required by the engine even with a small filter. This miniaturization of the filter allows the amount of oil in the filter to be kept low during operation, reduces the weight of the filter, and also prevents the filter from loosening or falling off due to vibration. Enjoy your Honda engine for a long time with proper oil management.
Honda cars are best known for its high revving engines.
For the engine to perform 100%, regular oil maintenance is always crucial. Changing the oil at an interval of 3,000 to 5,000km is recommended and replacing the oil filter at the time of oil change is also important to keep the engine in optimum condition.
Filtration performance and low viscosity loss are characteristics that contradict each other; however, we have been successful in developing an oil filter achieving both at a high level.
By placing a strong magnet inside the oil filter, we are able to isolate any metal contamination that might cause filtration clogging. We've also adopted a special filter material that has low viscosity loss. As a result, the oil filter can remove 98% of particles up to 50?in size, achieving high filtration performance with minimal viscosity loss.
The adaptation of high-performance filter material has allowed us to achieve the required oil filtration performance in a much smaller package. This translates to less oil requirement, lighter weight of the oil filter itself, which can minimize the risk of the oil filter from loosening due to engine vibration. Please enjoy your Honda engine with proper oil management.
B-/F-/K-/L-series engines and others (not applicable to C30/32 engines)
External diameter 65mm, Height 65 mm , Thread M20xP1.5
*Recommended replacement interval 5,000~6,000km
*Same configuration to Honda Genuine Oil Filter 15400-PFB-007